Portable I-Line Panel:
-0.090" aluminum enclosure, NEMA 3R powder coated RAL7035
-Carbon steel frame with forklift pockets and lifting eyelets
-1200A 600VAC 3P-5W, 45" spacing I-Line interior
-Four sets of Male 400A 16 series Camlok Input with snap covers
-Four large removable gland plates
-Two small removable gland plates
-Large clear polycarbonate window
-Pad-lockable door with four 1/4 turn latches
-Bottom access trap door (hardwire out access).
-Square-D I-line panelboards are UL/C and UL listed under file E33139.
-Available with thermal magnetic, Micrologic and electronic circuit breakers.
-I-Line circuit breakers, with their exclusive plug-on connection design provide superior reliability and performance advantages.
-15-1200A frame circuit breakers requier only a screwdriver and ratcheted firmly onto the bus stack. They are secured in place by a screw.
-The connectors are an integral part of the I-Line circuit breaker, eliminating the assembly of connectors to the bus bar.
-The unique line side connection requires no routine maintenance.
-All test are conducted in accordance with UL67 and CSA C22.2
-Solid neutral is mounted in the mains compartment with the main lugs.
-Available with short circuit current rating (SCCR) up to 200kA (Max. 100kA @600V).
Distribution Panel features:
-0.090" Aluminum NEMA 3R enclosure, powder coated RAL7035.
-Heavy duty carbon steel skid with large pockets and lifting eyelets.
-1200A MLO I-Line panelboard with 45" spacing.
-Male 400A 16 series Camlok Input with snap back covers.
-UL1640 Listed, Portable Power Distribution Panel, file number E350898.
-CAN/CSA C22.2 No.14 Listed and tested by ETL, Industrial Control Equipment.
-Bottom service trap door for easy access to main lugs for hardwire in/out.
-(6x) removable gland plates.
(HxLxW): 79.0"x 40.0"x 48.0"
-Weight*: 700 lbs
*All measurements are approximate and for estimation purposes only.