Due to unprecedented demand, please call, e-mail, or chat to check on stock before purchasing. Free Shipping orders of $200 or more
Taylor Power Systems provides quality standby and prime generator sets in stationary or mobile configurations that are diesel powered 9kW to 2000kW and gaseous powered 30kW to 400kW. The TMC100 is EPA Tier 3 certified; conforms to CSA, NEMA, EGSA, and ANSI standards; and is prototype and production tested to ensure one step acceptance per NFPA 110.
John Deere Tier 3 Flex Engine
• Model – 4045 HF285
• Heavy Duty Air Cleaner w/Service Indicator
• 40 C Ambient Radiator
• Electronic Isochronous Governor with 0.25% Frequency Regulation
Stamford Alternator
• Model - UCI274C311
• Brushless Rotating Field Generator with Class H Insulation
• 1% AVR, w/PMG
• Tropical Coating
Multi-Voltage Kit
• Three Position Y-YY-ZIG/ZAG Multi-Voltage Selector Switch
• 400 Amp, T5 Frame, 100% Rated, Electronic Trip (Long & Short)
Sound Attenuated Weather Galvanneal White Enclosure w/Internal Critical Silencer. 1" UL-94 Sound Attenuating Foam
• Heavy Duty 14 Ga. Galvanneal Steel
• Peaked Roof
• Bolted Construction
• Lockable Doors
• Stainless Steel Hardware
• Powder Coat Finish
200 Gallon Single Wall Integral Tank Trailer
• 7,000 LB Dual Axle
• 2-5/16" Ball Hitch
Taylor Deep Sea Control Panel
Heavy Duty Integral Vibration Isolators between Engine/Alternator and Base
Oil Drain Kit (Oil Drain Piped to Edge of Skid w/Valve)
Lube Oil & Antifreeze (Initial Fill)
Battery Rack & Cables
TMC Skid Base
Flex Fuel Lines
120V, 1500W Block Heater
Coolant Drain Kit (Coolant Drain Piped to Edge of Skid w/Valve)
12V Lead Acid Battery, 950CCA
Marinco Battery Charger
Battery Disconnect Switch
(1) 20 Amp GFI Receptacle with Circuit Breaker
(5) 400 Amp Female Cam-Lock Receptacles (Mounted)