Due to unprecedented demand, please call, e-mail, or chat to check on stock before purchasing. Free Shipping orders of $200 or more
Buck-Boost DC-DC Converter 25A / 50A / 100A
DC-DC Converter for charging a 12/24V service battery in vehicles with an intelligent dynamo.
The Buck-Boost DC-DC Converter is a DC-DC converter for charging a 12/24V service battery in vehicles with an intelligent dynamo. Since, when the engine is running, these dynamos (powered by the on-board electronics of Euro 5 and 6 engines) do not always emit the correct charging current, a DC-DC converter is essential for charging the service battery properly.
DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator (regenerative braking, Euro 5 and Euro 6 engines)
The Buck-Boost DC-DC Converter is a DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator. The converter will charge the auxiliary battery with a pre-set charge
voltage, eliminating high voltages (e.g. Mercedes: 15,4V) and low voltages.
‘Engine running’ detection system
Deep discharge of the vehicle's starting battery is avoided by a built-in ‘engine running’ detection system.
Instead of this detection system, the converter can also be activated by means of a programmable input (D+, CAN bus or (+)15 connection).
Fully programmable
The converter can be fully programmed by means of a simple and user-friendly PC application.
(USB type A male to USB type B male cable needed)
One product for 12V, 24V and 12/24V systems
The converter can be programmed to charge a 12V or a 24V auxiliary battery from either a 12V or a 24V alternator and starter battery.
Buck-Boost DC-DC Converter | 25A | 50A | 100A |
Input voltage range | 10-30V | ||
Under voltage threshold | 10V | ||
Output voltage range | 10-30V | ||
Maximum charge current | 12V : 25A 24V : 15A |
12V : 50A 24V : 25A |
12V : 100A 24V : 50A |
Weight | 0,6kg | 1,4kg | 4,1kg |
Dimensions | 165 x 120 x 30mm | 213 x 120 x 30mm | 288 x 162 x 95mm |